In addition to the elegant design solution for suspended ceilings, here you can see practical developments.

We would like to dwell on some interesting points that are implemented in the slatted ceiling of this office space.

Firstly, the choice of color. The project uses a KRAFT cube-shaped rail with a wood texture. Such a rail is more practical during installation and operation than wooden, but it looks no worse. The wooden texture softens the cold tones in the interior, gives the room coziness and comfort.

The second interesting point is the location of the rail diagonally, at an angle of 45 degrees. It would seem a trifle, but how the room is changing! Of course, installing such a ceiling is more difficult, but the result is worth it

And the third point, practical, which is worth paying attention to everyone who is going to install a rack ceiling in their room. As you can see, in this room it is impossible to make a ceiling of solid rails. Therefore, it is necessary to place two or more rails in a row, connecting them together using connecting elements or making a gap between them (as in this example). But even when using the connector, the joint between the rails can be considered. And if you install rails of the same length from the wall, then the connecting seam looks like a line passing through the entire ceiling perpendicular to the rails. But in practice, due to various circumstances, it is not always possible to get an even seam. Therefore, along the entire length, the seam or gap will look messy.

This problem is solved by the location of neighboring slats with a shift, as implemented in this room. You can find detailed information about this scheme with the algorithm for installing rack ceilings in our technological maps.

Inspiration to you!